Rich_wrex

iTrader: (1)

Hello all,

well after a day of struggling i havent managed to fit my whiteline alk

everything is friggin tight thats all i know, the problem ive now got is i cant get the wishbone to articulate away from the body enough to get a socket on the end of it to undo the last nut.

any tips or help of what other people have done would be much appreciated.

cheers

Rich

deangtiuk

iTrader: (3)

you have completely removed the U shaped brace from the underside? Once thats out the way its not too hard it bolts to the chassis legs.

Rich_wrex

iTrader: (1)

hmm not sure which part you mean?

do i have to completely remove the wishbone, because i have released the two bolts that go into the chassis just trying to get it into a position where i can get the end nut off.

cheers

Rich_wrex

iTrader: (1)

forgot to say its a 94 wrx.

Cheers

mattwrxCS

iTrader: (1)

I fitted mine the other week and i know what you mean by tight
I didn't remove anything else to change the bushes.
I just got a 22mm spanner on the end of the nut and used a lot of force. You could try sleeving a bar over the spanner to get more leverage.
When i fitted the new bush, i used a small pry bar to get it into position.