are these geometry settings correct ?
#1
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Nov 2004
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
are these geometry settings correct ?
I have a problem with my 05 sti. Had a geometry setting done not long ago and it is still not ok.
I'm a complete idiot when it comes to read the angles and stuff, so can anybody tell me if these are correct. I got them from the paper imprint when the settings were done.
Front:
camber: left -0.46 deg, right -0.44 deg,
toe: -0.01 deg on both sides
caster: 4.62 deg left, 4.47 deg right
rear:
camber: left -1.24 deg, right -1.44 deg
toe: left 0.02 deg, -0.01 deg
Checked with the values from my owners manual and those are different, also they show exactly the same values for left and right.
Someone please advise.
I'm a complete idiot when it comes to read the angles and stuff, so can anybody tell me if these are correct. I got them from the paper imprint when the settings were done.
Front:
camber: left -0.46 deg, right -0.44 deg,
toe: -0.01 deg on both sides
caster: 4.62 deg left, 4.47 deg right
rear:
camber: left -1.24 deg, right -1.44 deg
toe: left 0.02 deg, -0.01 deg
Checked with the values from my owners manual and those are different, also they show exactly the same values for left and right.
Someone please advise.
#2
Scooby Senior
iTrader: (3)
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes
on
0 Posts
In a perfect world they would be the same, however use and abuse wears the components and you get some variation. Yours look equal side to side, which is more important.
Was it a Scoob specialist or a "Kwik Fit" job, mine was done by an expert and he set it up superbly just a touch of over-steer out of corners, and a sharper turn-in !
HTH
DunxC
P.S. Can you add the "book" settings for comparison ?
Was it a Scoob specialist or a "Kwik Fit" job, mine was done by an expert and he set it up superbly just a touch of over-steer out of corners, and a sharper turn-in !
HTH
DunxC
P.S. Can you add the "book" settings for comparison ?
#3
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Nov 2004
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
It was not doneby a subaru specialist, as there are none around where I live.... so I went to a "specialist" who can set up any car.
The book settings are:
front and rear toe 0 mm
camber front -0.25 deg, rear -1.30 deg
These are all the settings written in the book.
The book settings are:
front and rear toe 0 mm
camber front -0.25 deg, rear -1.30 deg
These are all the settings written in the book.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
jonnyboy82
Lighting and Other Electrical
0
29 September 2015 01:59 PM