I got alloy bottom arms on the car

What do I mount on my car this : rallynuts.com motorsport : Whiteline Anti-Roll Bar Drop Link Kit Front Alloy Subaru Impreza motor sports & karting
-------------------------------------------------------------------
When this kit is on, it looks like it is spreding were much to the sides

rallynuts.com motorsport : Whiteline Anti-Roll Bar Drop Link Kit Front Spherical Bearing Subaru Impreza motor sports & karting

Thanks Eacy

 

Buy standard Subaru, they are so much better.

 

Got 22mm swaybar from Whiteline front and back, no standard for me.....

 

I too have a 25mm rear bar and 22mm front bar, std links fit fine and are the best, spherical links dont last more than a few thousand miles before knocking.

 

there is a kit from whitline with solid links and made for the alloy arms, cant remember part no but they are out there. cusco kid will be able to assist but as said, dont go for sphericals

 

Steel arms - KLC30

Alloy arms - KLC32

I'm sure the KLC30 has an 8mm hole and a 10mm hole where as the KLC32 has 10mm holes either end.

 

Whitline says that alloy bottom arms car are to use the sphericals ones..... But f..k they are dieing fast.... Had for at a short time the KLC30 on the car, was fine, but WL says it is for steel boyyom arms, so went back for KLC38/39....

The KLC32 is for new age cars : Whiteline Automotive - performance handling and suspension products. car spring coil shock damper swaybar sway bar anti-sway bush bushes australia australian whiteline automotive performance road holding turn-in camber caster toe in vehicle hot 4 v8

 

Sphericals are only £5 or so each from any bearing supplier

 

I've kept my standard front ones on as they seem fine but when i looked into it the guy from Whiteline mentioned these...

http://www.scoobyparts.com/acatalog/...ROP_LINKS.html

 

Just ordered a set of KLC32...Looking forward to fit them, and see how they work...

Thanks for all the help

Eacy