05 WRX Spring Change - Difficult
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Apr 2004
Location: Somewhere in Kent, sniffing some V-Power
Posts: 15,029
Likes: 0
Received 0 Likes
on
0 Posts
05 WRX Spring Change - Difficult
As above. I am considering changing the springs on my car.
It just sits too high at the moment and as the cost of replacement springs is quite low, I was toying with idea of doing the swap myself.
I have access to good tools and a pit. I have changed most parts on cars now accept for the suspension.
Is it fairly straight forward or should I pay man?
It just sits too high at the moment and as the cost of replacement springs is quite low, I was toying with idea of doing the swap myself.
I have access to good tools and a pit. I have changed most parts on cars now accept for the suspension.
Is it fairly straight forward or should I pay man?
#3
It's a piece of cake, the fonts are only three nuts at top and 2 bolts at the bottom. Rear are the same but rear seats need to some out at to get to the top nuts. You'll need a spring compressor to remove springs from struts
Thread
Thread Starter
Forum
Replies
Last Post
Uncle Creepy
Other Marques
43
27 December 2015 04:02 PM
matt12
ScoobyNet General
59
08 November 2015 09:15 PM