Just returned from Powerstation!!
#1
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Aug 2003
Location: Mitsubishi Lancer Evolution 8 RS
Posts: 6,517
Likes: 0
Received 1 Like
on
1 Post
Just returned from Powerstation!!
Hey guys, just returned from getting my remap done at Powerstation!! To say I'm impressed is an understatement
I was gonna go to JGM but he was mapping in Kent but it was a bit of a trek!! Glad I didn't really, one of the pipes on my Turbo was blocked so they had to removed it and swap over one from another Turbo!!
Anyway, 5hrs later and my car was all done Chuffed to bits with the way it drives on the road but power was only 352bhp and 302lb/ft torque!!
Thr injectors are apparently at about 93% capacity so will be looking to change them with any other mods I do
Current mods are-
Full 3inch decat from Pro Speed
K&N Typhoon CAIK
NGK7 plugs
Walbro pump
Forge BOV (soon to be blanked off )
TD05-20g turbo
Hope to get a few more bits soon but as Xmas is coming, I'll have to spend all the cash on myself
Merv
ps the drive back with Bonzee certainly was fun
I was gonna go to JGM but he was mapping in Kent but it was a bit of a trek!! Glad I didn't really, one of the pipes on my Turbo was blocked so they had to removed it and swap over one from another Turbo!!
Anyway, 5hrs later and my car was all done Chuffed to bits with the way it drives on the road but power was only 352bhp and 302lb/ft torque!!
Thr injectors are apparently at about 93% capacity so will be looking to change them with any other mods I do
Current mods are-
Full 3inch decat from Pro Speed
K&N Typhoon CAIK
NGK7 plugs
Walbro pump
Forge BOV (soon to be blanked off )
TD05-20g turbo
Hope to get a few more bits soon but as Xmas is coming, I'll have to spend all the cash on myself
Merv
ps the drive back with Bonzee certainly was fun
#2
Scooby Regular
iTrader: (2)
Join Date: Apr 2007
Location: knocking on the door of 400bhp with v power smashed through it with e85
Posts: 1,201
Likes: 0
Received 0 Likes
on
0 Posts
yes merv nice to open my car up gutted at the tunnels to much traffic so there was no point turning the anti lag on good laugh mate see you soon
#5
Scooby Regular
Join Date: Oct 2003
Location: Gloucester
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
Can I be so bold as to ask how much a map costs at Powerstation? I am looking to get my WRX done in the near future and would like somewhere fairly local ish
Trending Topics
#9
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Aug 2003
Location: Mitsubishi Lancer Evolution 8 RS
Posts: 6,517
Likes: 0
Received 1 Like
on
1 Post
Believe them!! Don't know why I put off having it done for so long I'm now even more!!
If I'd have had it done by a mobile mapper, I don't think they would have been able to sort the wee problem with the blocked pipe!!
If I'd have had it done by a mobile mapper, I don't think they would have been able to sort the wee problem with the blocked pipe!!
#11
Scooby Regular
iTrader: (2)
Join Date: Apr 2007
Location: knocking on the door of 400bhp with v power smashed through it with e85
Posts: 1,201
Likes: 0
Received 0 Likes
on
0 Posts
--------------------------------------------------------------------------------
#3 (permalink)
Quote:
Originally Posted by bonzee
yes merv nice to open my car up gutted at the tunnels to much traffic so there was no point turning the anti lag on good laugh mate see you soon
Getting stuck in traffic didn't help the drive back at all!! Will have to visit the Butetown tunnels with the ALS buddy
Catch you soon
see you soon
#3 (permalink)
Quote:
Originally Posted by bonzee
yes merv nice to open my car up gutted at the tunnels to much traffic so there was no point turning the anti lag on good laugh mate see you soon
Getting stuck in traffic didn't help the drive back at all!! Will have to visit the Butetown tunnels with the ALS buddy
Catch you soon
see you soon
#16
Scooby Regular
Join Date: Jun 2007
Location: Barnsley
Posts: 1,615
Likes: 0
Received 0 Likes
on
0 Posts
You need to concentrate on increasing torque, will make the car feel so much better than overall power.
A cheap fpr will alleviate the stress on the injectors aswell unless your going for more power then new injectors anyway.
A cheap fpr will alleviate the stress on the injectors aswell unless your going for more power then new injectors anyway.
#18
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Aug 2003
Location: Mitsubishi Lancer Evolution 8 RS
Posts: 6,517
Likes: 0
Received 1 Like
on
1 Post
Talor- It's running at 1.6 peak dropping down to 1.45 and is pretty constant at that
Lee, Jimmy- I did ask about a FPR but he said there wasn't much point Torque is a wee bit low, new headers will be coming soon to increase spool up followed by a wee map tweak
So not many mods to go I think-
Headers and Up pipe
650cc injectors (or bigger )
FPR
FMIC
Best get the overtime in!!!!
Merv
Lee, Jimmy- I did ask about a FPR but he said there wasn't much point Torque is a wee bit low, new headers will be coming soon to increase spool up followed by a wee map tweak
So not many mods to go I think-
Headers and Up pipe
650cc injectors (or bigger )
FPR
FMIC
Best get the overtime in!!!!
Merv
#21
Scooby Regular
Join Date: Jun 2007
Location: Barnsley
Posts: 1,615
Likes: 0
Received 0 Likes
on
0 Posts
Talor- It's running at 1.6 peak dropping down to 1.45 and is pretty constant at that
Lee, Jimmy- I did ask about a FPR but he said there wasn't much point Torque is a wee bit low, new headers will be coming soon to increase spool up followed by a wee map tweak
So not many mods to go I think-
Headers and Up pipe
650cc injectors (or bigger )
FPR
FMIC
Best get the overtime in!!!!
Merv
Lee, Jimmy- I did ask about a FPR but he said there wasn't much point Torque is a wee bit low, new headers will be coming soon to increase spool up followed by a wee map tweak
So not many mods to go I think-
Headers and Up pipe
650cc injectors (or bigger )
FPR
FMIC
Best get the overtime in!!!!
Merv
The FMIC will make one hell of a difference, IMO it holds the scoobs back from being easier to tune I reckon.
As a comparison, and I know its not just down to the intercooler, but Evo's seem to get a lot more bang for the buck out of mapping from stock, and I think the FMIC plays a part in this. IMO.
#26
Scooby Regular
Join Date: Jun 2007
Location: Barnsley
Posts: 1,615
Likes: 0
Received 0 Likes
on
0 Posts
#27
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Aug 2003
Location: Mitsubishi Lancer Evolution 8 RS
Posts: 6,517
Likes: 0
Received 1 Like
on
1 Post
I'm only aiming for 380-400 but will still change to a FMIC as they do a better job, especially as the scoop is only effective until 100mph IIRC!!
Oh, and they do look cool
Oh, and they do look cool