droplinks
#3
Scooby Regular
iTrader: (4)
Join Date: Aug 2002
Location: Neath, Wales
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
Mine have a little play in them (pointed out at last MOT) so I'm going for these via a Group Buy on here.
https://www.scoobynet.com/group-buys...rop-links.html
HTH
https://www.scoobynet.com/group-buys...rop-links.html
HTH
#5
18 June 1815 - Waterloo
iTrader: (31)
Bit of a pain to change as they use a hollow hex head. I know I have the scar's to prove it
http://cgi.ebay.co.uk/Whiteline-Fron...item1c0dee022d
http://cgi.ebay.co.uk/Whiteline-Fron...item1c0dee022d
Last edited by The Trooper 1815; 20 November 2009 at 05:40 PM.
#6
if you have the alloy bottom arms with this type droplink standard:
Import WRX & STi Impreza Turbo Front Drop Links 01 on on eBay (end time 25-Nov-09 09:03:09 GMT)
then the whiteline klc30 wont fit yours, you need the klc32.
this is the explanation i found eventually on the difference between the two:
An explanation of the differences in the application of Impreza front end links kits KLC30 and KLC32 follows:
Length: The length of both types is the same.
Hole Diameter:
KLC30: Top 8mm. Bottom 10mm
KLC32: Both holes 10mm
KLC30: Replacement end link kit for OE plastic type end links as fitted to "most" vehicles with steel front lower control arms.
KLC32: Replacement end link kit for OE ball joint type end links as fitted to "most" vehicles with alloy front lower control arms.
I got mine off with a grinder in the end, no point messing about if they are buggered anyway.
Import WRX & STi Impreza Turbo Front Drop Links 01 on on eBay (end time 25-Nov-09 09:03:09 GMT)
then the whiteline klc30 wont fit yours, you need the klc32.
this is the explanation i found eventually on the difference between the two:
An explanation of the differences in the application of Impreza front end links kits KLC30 and KLC32 follows:
Length: The length of both types is the same.
Hole Diameter:
KLC30: Top 8mm. Bottom 10mm
KLC32: Both holes 10mm
KLC30: Replacement end link kit for OE plastic type end links as fitted to "most" vehicles with steel front lower control arms.
KLC32: Replacement end link kit for OE ball joint type end links as fitted to "most" vehicles with alloy front lower control arms.
I got mine off with a grinder in the end, no point messing about if they are buggered anyway.
Trending Topics
#8
Scooby Regular
iTrader: (4)
Join Date: Mar 2007
Location: SWANSEA/BRIDGEND
Posts: 3,784
Likes: 0
Received 0 Likes
on
0 Posts
Mine have a little play in them (pointed out at last MOT) so I'm going for these via a Group Buy on here.
https://www.scoobynet.com/group-buys...rop-links.html
HTH
https://www.scoobynet.com/group-buys...rop-links.html
HTH
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM