JGM Remap- 25th October
08 October 2012, 09:25 PM
#1
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Aug 2003
Location: Mitsubishi Lancer Evolution 8 RS
Posts: 6,517
Likes: 0
Received 1 Like
on
1 Post
JGM Remap- 25th October
Right guys, who is in need of a remap! Looking to get the numbers to get the cost down 
So Steve (S10WRC) has sorted out a date for Simon to come down! Looking to meet at Ace Motorsport in Newbridge just in case anyone needs any parts fitted or bits doing!
1. Steve (S10WRC)
2. Merv
3.
4.
5.
So Steve (S10WRC) has sorted out a date for Simon to come down! Looking to meet at Ace Motorsport in Newbridge just in case anyone needs any parts fitted or bits doing!
1. Steve (S10WRC)
2. Merv
3.
4.
5.
09 October 2012, 10:47 AM
#2
Yes, after chatting with Merv at Prodrive on Sunday i've arranged with Simon to come down on Thursday 25th and to use ACE Motorsport in Newbridge as a base for the mapping session. Apart from the AXXX Newbridge-Blackwood bypass being a near perfect road for mapping cars on (we've used it a few times in the past with Andy Forrest & Bob Rawle etc. and they love the combination of long uphill/downhill sections and the long straights 
) , it will also be useful to have a fully equipped specialist workshop at hand should anyone need bits doing/checking before or during mapping.
For those who don't know of ACE Motorsport, Andy the owner is a former M-sport and Prodrive world rally team engineer, so they know a thing or two about preparing Scooby's
If anyone needs anything sorting, feel free to drop me a PM and i'll organise or you can contact ACE direct on 01495 241915.
I also have a spare Simtek/Alcatek ecu for 99-00 Impreza which is due back from upgrade to latest spec (closed-loop idle, knock control etc.) in the next week. It has Anti-lag + Launch activated and will come complete with charge temperature sensor, anti-lag switch and 1 year warranty from Alcatek
. If anyone is interested this could be supplied/fitted/mapped as a package on the 25th for a big saving over retail price 
Let's get some numbers up, the more we get the bigger the discount for everyone.....
Steve
) , it will also be useful to have a fully equipped specialist workshop at hand should anyone need bits doing/checking before or during mapping.For those who don't know of ACE Motorsport, Andy the owner is a former M-sport and Prodrive world rally team engineer, so they know a thing or two about preparing Scooby's
If anyone needs anything sorting, feel free to drop me a PM and i'll organise or you can contact ACE direct on 01495 241915.
I also have a spare Simtek/Alcatek ecu for 99-00 Impreza which is due back from upgrade to latest spec (closed-loop idle, knock control etc.) in the next week. It has Anti-lag + Launch activated and will come complete with charge temperature sensor, anti-lag switch and 1 year warranty from Alcatek
. If anyone is interested this could be supplied/fitted/mapped as a package on the 25th for a big saving over retail price Let's get some numbers up, the more we get the bigger the discount for everyone.....
Steve
Last edited by S10WRC; 09 October 2012 at 10:42 PM.
09 October 2012, 08:55 PM
#4
I'm getting mine done so it's one less thing to worry about when the spring comes and i get the car out ready for next season
lol
09 October 2012, 11:31 PM
#7
Scooby Regular
iTrader: (2)
Join Date: Jun 2012
Location: manchester
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Yes, after chatting with Merv at Prodrive on Sunday i've arranged with Simon to come down on Thursday 25th and to use ACE Motorsport in Newbridge as a base for the mapping session. Apart from the AXXX Newbridge-Blackwood bypass being a near perfect road for mapping cars on (we've used it a few times in the past with Andy Forrest & Bob Rawle etc. and they love the combination of long uphill/downhill sections and the long straights ) , it will also be useful to have a fully equipped specialist workshop at hand should anyone need bits doing/checking before or during mapping.
For those who don't know of ACE Motorsport, Andy the owner is a former M-sport and Prodrive world rally team engineer, so they know a thing or two about preparing Scooby's
If anyone needs anything sorting, feel free to drop me a PM and i'll organise or you can contact ACE direct on 01495 241915.
I also have a spare Simtek/Alcatek ecu for 99-00 Impreza which is due back from upgrade to latest spec (closed-loop idle, knock control etc.) in the next week. It has Anti-lag + Launch activated and will come complete with charge temperature sensor, anti-lag switch and 1 year warranty from Alcatek. If anyone is interested this could be supplied/fitted/mapped as a package on the 25th for a big saving over retail price
Let's get some numbers up, the more we get the bigger the discount for everyone.....
Steve
) , it will also be useful to have a fully equipped specialist workshop at hand should anyone need bits doing/checking before or during mapping.For those who don't know of ACE Motorsport, Andy the owner is a former M-sport and Prodrive world rally team engineer, so they know a thing or two about preparing Scooby's
If anyone needs anything sorting, feel free to drop me a PM and i'll organise or you can contact ACE direct on 01495 241915.
I also have a spare Simtek/Alcatek ecu for 99-00 Impreza which is due back from upgrade to latest spec (closed-loop idle, knock control etc.) in the next week. It has Anti-lag + Launch activated and will come complete with charge temperature sensor, anti-lag switch and 1 year warranty from Alcatek
. If anyone is interested this could be supplied/fitted/mapped as a package on the 25th for a big saving over retail price Let's get some numbers up, the more we get the bigger the discount for everyone.....
Steve
Could you pm me price for this could
Be interested if the price is right xx
Trending Topics
10 October 2012, 06:29 AM
#8
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Aug 2003
Location: Mitsubishi Lancer Evolution 8 RS
Posts: 6,517
Likes: 0
Received 1 Like
on
1 Post
Prices
Ecutek- £660 first map, then £360 with licence already.
Alcatek (original simtek)
Classic £954 plus £150 for ALS/Launch,
Newage £1074
New simtek
Classic £1074 and £150 ALS/Launch
Newage £1314
Syvecs
£1800 for plug and play and extra options available like wideband, toucan display etc
Apexi £300.
If 5 cars then no travel and 10% off, 10 cars 20% off!
Ecutek- £660 first map, then £360 with licence already.
Alcatek (original simtek)
Classic £954 plus £150 for ALS/Launch,
Newage £1074
New simtek
Classic £1074 and £150 ALS/Launch
Newage £1314
Syvecs
£1800 for plug and play and extra options available like wideband, toucan display etc
Apexi £300.
If 5 cars then no travel and 10% off, 10 cars 20% off!
15 October 2012, 06:56 PM
#21
Scooby Regular
iTrader: (2)
Join Date: May 2010
Location: Brecon, Mid Wales
Posts: 1,909
Likes: 0
Received 0 Likes
on
0 Posts
I would be merv (as per previous thread) if I could have had my Al/LC activated on my simtek for a couple of hundred, but since it's going to be closer to the 500 mark it's money I can't be doing with spending on the car ATM, as mother tells me when I see her "" you've got to start prioritising boy", 26 years later I'm starting to see where she's coming from!!!
Have fun and hope everyone get the results they're looking for .
Rob :-)
Have fun and hope everyone get the results they're looking for .
Rob :-)
15 October 2012, 11:13 PM
#22
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Aug 2003
Location: Mitsubishi Lancer Evolution 8 RS
Posts: 6,517
Likes: 0
Received 1 Like
on
1 Post
That's cool Rob I just need mine doing/checking really as I'm not sure if my Apexi was mapped in Japan or Ireland, either way it needs to be mapped for Tesco Momentum with added pops an bangs
I just need mine doing/checking really as I'm not sure if my Apexi was mapped in Japan or Ireland, either way it needs to be mapped for Tesco Momentum with added pops an bangs
22 October 2012, 01:39 PM
#24
I would be merv (as per previous thread) if I could have had my Al/LC activated on my simtek for a couple of hundred, but since it's going to be closer to the 500 mark it's money I can't be doing with spending on the car ATM, as mother tells me when I see her "" you've got to start prioritising boy", 26 years later I'm starting to see where she's coming from!!!
Have fun and hope everyone get the results they're looking for .
Rob :-)
Have fun and hope everyone get the results they're looking for .
Rob :-)
22 October 2012, 06:03 PM
#25
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
ecu was installed by antoher dealer.. so I have to order software to map it from alcatek, my dealer software wont let me map it.. the new software will only then allow me to load a map, not tweak the current other dealers map which is fine and as it should be, but means I have to map the car from scratch not just type in the als code and set the als up
Simon
22 October 2012, 06:43 PM
#26
unfrotunatly not..
ecu was installed by antoher dealer.. so I have to order software to map it from alcatek, my dealer software wont let me map it.. the new software will only then allow me to load a map, not tweak the current other dealers map which is fine and as it should be, but means I have to map the car from scratch not just type in the als code and set the als up
Simon
ecu was installed by antoher dealer.. so I have to order software to map it from alcatek, my dealer software wont let me map it.. the new software will only then allow me to load a map, not tweak the current other dealers map which is fine and as it should be, but means I have to map the car from scratch not just type in the als code and set the als up
Simon
25 October 2012, 10:09 PM
#27
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Aug 2003
Location: Mitsubishi Lancer Evolution 8 RS
Posts: 6,517
Likes: 0
Received 1 Like
on
1 Post
Thanks to Simon for mapping the R today, runs a lot smoother now with the VF43 on and hopefully when I get the Newage intercooler to fit and the injectors sorted along with MAF it'll be running even better!! And added pops and bangs 
25 October 2012, 10:29 PM
#28
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
No problem.
Btw if you turn the air con on the pops and bangs go off, should you need to be quieter.
There is a stage louder on p&b too but it sounded so good as is
Simon
Btw if you turn the air con on the pops and bangs go off, should you need to be quieter.
There is a stage louder on p&b too but it sounded so good as is
Simon
25 October 2012, 11:12 PM
#29
Mine's going like f**k now..... especially on cal 8
I think it made everyone's day when we pulled mine into the garage to tweak anti-lag & set up launch control, flames were a-flyin' lol !Big thanks to Simon, excellent job and a pleasure to work with
Last edited by S10WRC; 25 October 2012 at 11:22 PM.
26 October 2012, 07:55 AM
#30
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Aug 2003
Location: Mitsubishi Lancer Evolution 8 RS
Posts: 6,517
Likes: 0
Received 1 Like
on
1 Post
Yes, sounded sweet as when it came back from the map Merv
Mine's going like f**k now..... especially on cal 8 I think it made everyone's day when we pulled mine into the garage to tweak anti-lag & set up launch control, flames were a-flyin' lol !
Big thanks to Simon, excellent job and a pleasure to work with
Mine's going like f**k now..... especially on cal 8
I think it made everyone's day when we pulled mine into the garage to tweak anti-lag & set up launch control, flames were a-flyin' lol !Big thanks to Simon, excellent job and a pleasure to work with
Cheers for sorting it out Steve