wanted an 02 sensor for 2002 bugeye (BANK 1)
#3
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
There is no such thing as an 02 sensor (lambda sensor) for bank 1......
The Newage has two lambda sensors.
The front one checks the exhaust gasses and relays info to the ECU to help with fuelling. The rear one checks the efficiency of the catalytic converters.
They throw different CEL codes if not working. What CEL codes have you got ??
Try the usual crop of breakers![Big Grin](https://www.scoobynet.com/images/smilies/biggrin.gif)
http://www.scoobybits.co.uk/
http://www.gradea-subaru.co.uk/
http://www.scoobyteknixuk.com/
HTH
Shaun
The Newage has two lambda sensors.
The front one checks the exhaust gasses and relays info to the ECU to help with fuelling. The rear one checks the efficiency of the catalytic converters.
They throw different CEL codes if not working. What CEL codes have you got ??
Try the usual crop of breakers
![Big Grin](https://www.scoobynet.com/images/smilies/biggrin.gif)
http://www.scoobybits.co.uk/
http://www.gradea-subaru.co.uk/
http://www.scoobyteknixuk.com/
HTH
Shaun
Last edited by Midlife......; 04 July 2009 at 02:56 PM.
#5
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jun 2009
Location: co durham
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
yeah we know alyn, we just got a rear lambda sensor of him to try,when we removed old 1 had a cut in the wire so hopefully this is why its throwing the p0420 code,will need to see if light stays of
![Wink](https://www.scoobynet.com/images/smilies/wink.gif)
#6
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
P0420 Code is the rear lambda thinking that the cat is not working............It's unusual for this sensor to break as it's pretty far downwind from the engine.
Hopefully the problem was the broken wire and it should go out after 5-6 starts when the new sensor is fitted. Unfortunately the Bugeye ECU is a bit flakey on the P0420 CEL and Alyn may have to re-set the ECU for you![Frown](https://www.scoobynet.com/images/smilies/frown.gif)
Cheers
Shaun
Hopefully the problem was the broken wire and it should go out after 5-6 starts when the new sensor is fitted. Unfortunately the Bugeye ECU is a bit flakey on the P0420 CEL and Alyn may have to re-set the ECU for you
![Frown](https://www.scoobynet.com/images/smilies/frown.gif)
Cheers
Shaun
Thread
Thread Starter
Forum
Replies
Last Post
JonMc
Subaru Parts
22
06 February 2016 09:50 PM