Just got'em today, what ya think

[IMG]

 

Oops missed this one

 

Nice

 

Very nice mate, I had a look at them too and ended up flippin a coin to decide

 

Easier to clean, get sponge in is my criteria

 

dont need cleaning as often in the colour we have..lol

 

Notice the Sti centres, nice touch, and no spigots needed either. Good old Scoobyclinic on this one.

 

Yeah i noticed, finish off nicely

 

Mean lookin rubber

 

looking good do they do them in silver as well? are the tyres an upgrade or a standard fit, are they 17 or 18inch sorry for all the questions but thinking about buying some soon.

 

lookin nice frosty

 

Nice combo.... I do like dark wheels

What Yoko is that mate????

Also, is it my eyes or do you need her lowering a tad....

 

Not sure about the lowering, considered myself but with all the pot holes and speed bumps = OUCH
And I know the main route out of Kippax leeds rd is full of speed bumps

 

Looks like the Parada Spec2....

 

Silver/Gold/Gunmetal and Black, they are 18" (also in 17") and made for the impreza by Inovit. They are Redlines and Scoobyclinic have had a container full made for Scoobs, other places sell em but all the ones I called said they needed spigots to make the wheel fit on the stub shaft, in short the centre hole will be bigger and this is the load carrrying part of the wheel, not the studs, they just hold em on!! Nothing wrong with spigots but can stick to wheel or hub etc etc and IMO better without.
Scoobyclinic sell em for £100 a corner with nuts and locknuts too, plus the centres with the Sti as on mine.
Hope that helps mate.

 

As Corrodaboy correctly says Parada 2's. 225 x 40 x 18 92Y I think.
£105 a corner all in by my local tyre fitter in Kippax.

Lowering?? .....and do like Scott and Sticky on landing

 

Considering they're 18's it maybe the lighting.. But 35mm will be OK for Speed bumps... IMO of course, it adds a little aggression to the look as well as giving a lower CoG which brings handling benefits... and...as we all know.... handling upgrades are better than power upgrades.....

**Flame suit on**

 

If the 35mm you refer to is the '35' in the tire size Al, it's 35%. The profile figure is a percentage of the tire width. The difference between a 35 and a 40 is about 11mm, which would be imperceptible in relation to the CoG to all but the deftest F1 driver. The increase in sidewall rigidity however would be easily noticeable.

Flamey enough

 

Think he's referring to a 35mm drop in the suspension department

 

Oh

 

Ha ha I was referring to the ride height.....

I think you've gone one better...you've been shot down in flames..