Deep Dish Wheel Recommendations?
#2
They are CCW classics not xxr's
It totally depends on your budget and what sort of wheel you want. I'm happy to help look for some though, I enjoy trying to spend other people's money haha
It totally depends on your budget and what sort of wheel you want. I'm happy to help look for some though, I enjoy trying to spend other people's money haha
#3
Thanks, any help would be good I dont know much about wheels.
Budget wise I havent thought really, end of the day if the wheels are right i'll get them. My specs are 18x10.5 or 18x11 and I want a deep dish so it gives the effect of the car being really wide
Budget wise I havent thought really, end of the day if the wheels are right i'll get them. My specs are 18x10.5 or 18x11 and I want a deep dish so it gives the effect of the car being really wide
#4
Pretty much all of the Impreza's I've seen running the arches you are going to be making use Work Meister wheels. Probably because they are 3piece so can be adapted to suit the needs of each person.
Personally, if I was in your position where I was using the car as a display piece I'd be looking for something to really set it apart from the rest. Would you consider having some made to your spec?
Personally, if I was in your position where I was using the car as a display piece I'd be looking for something to really set it apart from the rest. Would you consider having some made to your spec?
#5
Yes thats what I am thinking too, dont want to follow the pack and put on some wheels that others have I want the car to be unique.
I have not thought about having some made no although thats a good idea, who are good at building wheels to a specific spec?
I have not thought about having some made no although thats a good idea, who are good at building wheels to a specific spec?
Trending Topics
#9
I'd be tempted to go for these in all gold. 18x11 et15 would give them an awesome concave look
http://rotiform.com/products_lvs_monolook.html
Or these if you want some dish
http://rotiform.com/products_lvs_concave.html
http://rotiform.com/products_lvs_monolook.html
Or these if you want some dish
http://rotiform.com/products_lvs_concave.html
#12
#13
Ok guys im in need of some help before I order my wheels. After much searching and being very disappointed that BBS dont do the LM range in the size and offset I want I have decided to look into XXR 521's
XXR only do the wheels in 18x10 +25 114.3 which look damn good with the flares, photos below. I have a 02 Blob, what I want to know is will a hub conversion from 5x100 to 5x114.3 be safe to run and with spacers can I reduce the offset (advised is +15)?
Sorry for the simple questions but im not clued up on wheels at all
Wheels:
On car:
XXR only do the wheels in 18x10 +25 114.3 which look damn good with the flares, photos below. I have a 02 Blob, what I want to know is will a hub conversion from 5x100 to 5x114.3 be safe to run and with spacers can I reduce the offset (advised is +15)?
Sorry for the simple questions but im not clued up on wheels at all
Wheels:
On car:
#14
Using adaptors will effectively increase the offset of the wheels. It's fairly simple to work out how much by though;
Wheels currently have an et of 25 and have been recommended to use a 15mm adaptor?
If that is correct 25-15 = et10
With regards to safety of the adaptor. As long as you buy good quality ones they will be fine, just don't risk an unknown brand/manufacturer
Wheels currently have an et of 25 and have been recommended to use a 15mm adaptor?
If that is correct 25-15 = et10
With regards to safety of the adaptor. As long as you buy good quality ones they will be fine, just don't risk an unknown brand/manufacturer
#15
Thanks Kev
I have been told by the guy who owns the silver blob that the wheels are 18x10 +25 but he is running +5mm adaptors front and +25 rear.
Now looking at the photo the rear sticks out which I dont want but the fronts are fine, can you tell how they'd look knowing they'd fall +10? Need to order these asap so want to make sure I get everything right
Wheel converters will be bought from CDF they have 15/20/25mm
I have been told by the guy who owns the silver blob that the wheels are 18x10 +25 but he is running +5mm adaptors front and +25 rear.
Now looking at the photo the rear sticks out which I dont want but the fronts are fine, can you tell how they'd look knowing they'd fall +10? Need to order these asap so want to make sure I get everything right
Wheel converters will be bought from CDF they have 15/20/25mm
Last edited by CarBen Fibre Creations; 30 April 2014 at 01:08 PM.
#16
No problem mate.
His wheel will be et20 at the front and et0 at the back. So, at the front yours would stick out 10mm more at the front and 10mm less at the rear. That is assuming you use the 15mm spacer!
I'm sure you'll been fine with CDF Adaptors
His wheel will be et20 at the front and et0 at the back. So, at the front yours would stick out 10mm more at the front and 10mm less at the rear. That is assuming you use the 15mm spacer!
I'm sure you'll been fine with CDF Adaptors
#17
No problem mate.
His wheel will be et20 at the front and et0 at the back. So, at the front yours would stick out 10mm more at the front and 10mm less at the rear. That is assuming you use the 15mm spacer!
I'm sure you'll been fine with CDF Adaptors
His wheel will be et20 at the front and et0 at the back. So, at the front yours would stick out 10mm more at the front and 10mm less at the rear. That is assuming you use the 15mm spacer!
I'm sure you'll been fine with CDF Adaptors
#18
Looks like I have found my setup
He is running 285/30/18 tyres too, look like a good fit to me so I will do the same.
Thanks for your help mate hopefully it'll all be on for the NBO if you are going?
He is running 285/30/18 tyres too, look like a good fit to me so I will do the same.
Thanks for your help mate hopefully it'll all be on for the NBO if you are going?
Last edited by CarBen Fibre Creations; 30 April 2014 at 02:03 PM.
#21
Ah, I'll be away with work unfortunately so won't be able to make it.
If you want to know anything else about wheels or fitment feel free to PM me
Look forward to seeing the wheels fitted
If you want to know anything else about wheels or fitment feel free to PM me
Look forward to seeing the wheels fitted
Thread
Thread Starter
Forum
Replies
Last Post
Wingnuttzz
Member's Gallery
30
26 April 2022 11:15 PM
alcazar
Computer & Technology Related
6
25 September 2015 07:56 AM