Got them brakes yet Knowlesy
#2
He gets them fitted on Friday.
As for thr CO2 I beleive it not worth it as the cooling works off vapour lifting the heat with it and therefor doesn't have to be that cold.
A lot of money for very little Scott.
J.
As for thr CO2 I beleive it not worth it as the cooling works off vapour lifting the heat with it and therefor doesn't have to be that cold.
A lot of money for very little Scott.
J.
#7
Scotty
I dont think you intercooler will like going to -170 and back to +100.
Not being technical I don't think it was made for that abuse.
I would be interested in finding out what you can achieve with it though.
J.
I dont think you intercooler will like going to -170 and back to +100.
Not being technical I don't think it was made for that abuse.
I would be interested in finding out what you can achieve with it though.
J.
Trending Topics
#9
Scooby Regular
Join Date: Oct 1998
Location: Scoobysport, Basildon, UK
Posts: 4,300
Likes: 0
Received 0 Likes
on
0 Posts
ScoobyK
Its our big KAD kit. 372mm AP discs and KAD's 6 pot callipers.
Very progressive braking, but its like having an accident when you really stand on them
Its our big KAD kit. 372mm AP discs and KAD's 6 pot callipers.
Very progressive braking, but its like having an accident when you really stand on them
#13
Scooby Regular
Join Date: Oct 2001
Location: Europe
Posts: 3,414
Likes: 0
Received 0 Likes
on
0 Posts
Why dont you get the AP 8 pot LC kit with 378mm 2 piece discs and light wheels instead of machining down the caliper and anodising stuff and messing around with the brakes and inadequate calipers, havy wheels and bad tyres??
#14
Claudius,
Looking at the AP catalogue at www.apracing.com you will find a road and a motorsport section. In the road section, the largest caliper you will find is a six pot to fit 362mm discs, so they cannot be used with these discs. If you look at the motorsport section, you will find Group A Tarmac Rally front calipers which are an 8 pot four pad water cooled design that will take the 378mm discs, but they are not road legal. Motorsport calipers do not have dust seals on the pistons. This is not a problem where a competitions vehicle is serviced thoroughly after each event but on the road the pistons can and do jam due to dust ingress. That being the case, the largest disc / caliper combination you can get from AP *for road use* is based on a 362mm disc, which is obviously smaller than the Scoobysport kit.
Cheers,
Pat.
Looking at the AP catalogue at www.apracing.com you will find a road and a motorsport section. In the road section, the largest caliper you will find is a six pot to fit 362mm discs, so they cannot be used with these discs. If you look at the motorsport section, you will find Group A Tarmac Rally front calipers which are an 8 pot four pad water cooled design that will take the 378mm discs, but they are not road legal. Motorsport calipers do not have dust seals on the pistons. This is not a problem where a competitions vehicle is serviced thoroughly after each event but on the road the pistons can and do jam due to dust ingress. That being the case, the largest disc / caliper combination you can get from AP *for road use* is based on a 362mm disc, which is obviously smaller than the Scoobysport kit.
Cheers,
Pat.
#16
Scooby Regular
Join Date: Oct 1998
Location: Scoobysport, Basildon, UK
Posts: 4,300
Likes: 0
Received 0 Likes
on
0 Posts
Claudius
Machining down calipers? (They are purpose made)
Heavy wheels? (Same weight as an 18" OZ)
Bad tyres? (Michelin Pilot Sport Cups - road legal slicks, mandatory in the Porsche Cup series)
Looks like that Meditteranean heat is getting to you mate.
Machining down calipers? (They are purpose made)
Heavy wheels? (Same weight as an 18" OZ)
Bad tyres? (Michelin Pilot Sport Cups - road legal slicks, mandatory in the Porsche Cup series)
Looks like that Meditteranean heat is getting to you mate.
#17
Scooby Regular
Join Date: Oct 2001
Location: Europe
Posts: 3,414
Likes: 0
Received 0 Likes
on
0 Posts
Pete
sorry, I read somewhere in the thread that you had calipers machined down?? (in the other thread)
I wasnt aware the Michelins were the cup ones, sorry.
But the wheels are still heavy!
sorry, I read somewhere in the thread that you had calipers machined down?? (in the other thread)
I wasnt aware the Michelins were the cup ones, sorry.
But the wheels are still heavy!
#18
Scooby Regular
Join Date: Oct 2001
Location: Europe
Posts: 3,414
Likes: 0
Received 0 Likes
on
0 Posts
Looking at the AP catalogue at www.apracing.com you will find a road and a motorsport section. In the road section, the largest caliper you will find is a six pot to fit 362mm discs
If you look at the motorsport section, you will find Group A Tarmac Rally front calipers which are an 8 pot four pad water cooled design that will take the 378mm discs, but they are not road legal.
Motorsport calipers do not have dust seals on the pistons.
[Edited by Claudius - 7/30/2002 6:31:31 PM]
#19
Claudius .
The whole point of showing people that there is a 372 kit available rgardless of unsprung weight, is if they want to they can upgrade.
As many people have pointed out there are bigger brakes & whilst it may take me a year to save for the Ferrari F60 or Enzo with 380's in carbon all the way round.
The 372's are superb......and yes I'd even consider an 8 pot kit, though this will be some time off for an Impreza. And yes I'm looking to upgrade to a 330 4 pot rear kit.
But your comment re heavy, tyres and inadequate calipers are unfounded & an open invite to come & test them for yourself is on offer,
Of course I'd love to try your set up that you recommend - just don't know anyone that has the on the Impreza though?
Keep drinking the water, applying the suntan lotion & best of all keep out of that hot Mediteranean sun, cos it certainly goes to your head..
[Edited by KNOWLESY 3 - 7/30/2002 9:42:51 PM]
The whole point of showing people that there is a 372 kit available rgardless of unsprung weight, is if they want to they can upgrade.
As many people have pointed out there are bigger brakes & whilst it may take me a year to save for the Ferrari F60 or Enzo with 380's in carbon all the way round.
The 372's are superb......and yes I'd even consider an 8 pot kit, though this will be some time off for an Impreza. And yes I'm looking to upgrade to a 330 4 pot rear kit.
But your comment re heavy, tyres and inadequate calipers are unfounded & an open invite to come & test them for yourself is on offer,
Of course I'd love to try your set up that you recommend - just don't know anyone that has the on the Impreza though?
Keep drinking the water, applying the suntan lotion & best of all keep out of that hot Mediteranean sun, cos it certainly goes to your head..
[Edited by KNOWLESY 3 - 7/30/2002 9:42:51 PM]
#20
I was up at Scoobysport about a week or so ago and had a chance to see and experience first hand these brakes and I have to say firstly that the breaks look awesome, even more so in the flesh. I also got taken out for a quick spin to experience them first hand and it felt like we had hit a wall every time they were used...fantastic stopping power. Made me realise I need to change my brakes sharpish.
Unfortunately I only have the standard 16" alloys on my Type R so these wouldn't fit and I can't afford to change both alloys and breaks at the moment as I am skint due to having to replace a blown turbo last week.
Can anyone recommend a decent(but not too dear please) brake upgrade which will fit a STI IV Type R with 16's. Not exactly sure what setup the Typre R has as standard but I presume I wouldn't be able to get away with just changing the pads. Some prices would me most useful.
P.S. Still think my Type R is quicker than the Scoobysport dream machine though :-)
Unfortunately I only have the standard 16" alloys on my Type R so these wouldn't fit and I can't afford to change both alloys and breaks at the moment as I am skint due to having to replace a blown turbo last week.
Can anyone recommend a decent(but not too dear please) brake upgrade which will fit a STI IV Type R with 16's. Not exactly sure what setup the Typre R has as standard but I presume I wouldn't be able to get away with just changing the pads. Some prices would me most useful.
P.S. Still think my Type R is quicker than the Scoobysport dream machine though :-)
#22
Scooby Regular
Join Date: Oct 1998
Location: Scoobysport, Basildon, UK
Posts: 4,300
Likes: 0
Received 0 Likes
on
0 Posts
uxg
There is a KAD kit that will fit under your 16" wheels and it uses the same 6 pot technology, just a slightly different caliper shape to suit the smaller disc radius.
There is a KAD kit that will fit under your 16" wheels and it uses the same 6 pot technology, just a slightly different caliper shape to suit the smaller disc radius.
#24
Scooby Regular
Join Date: Oct 2001
Location: Europe
Posts: 3,414
Likes: 0
Received 0 Likes
on
0 Posts
Claudius .
The whole point of showing people that there is a 372 kit available rgardless of unsprung weight, is if they want to they can upgrade.
The whole point of showing people that there is a 372 kit available rgardless of unsprung weight, is if they want to they can upgrade.
As many people have pointed out there are bigger brakes & whilst it may take me a year to save for the Ferrari F60 or Enzo with 380's in carbon all the way round.
You can buy Porsche GT2 ceramic brakes from Porsche or Movit, you dont need to buy a Ferrari that isnt even out yet or a Porsche GT2!
The 372's are superb......and yes I'd even consider an 8 pot kit, though this will be some time off for an Impreza. And yes I'm looking to upgrade to a 330 4 pot rear kit.
But your comment re heavy, tyres and inadequate calipers are unfounded & an open invite to come & test them for yourself is on offer
Thank you for your kind offer to try your brakes. I would be interested to see how they perform. Are you going to the Nürburgring in September? I will most probably go
Of course I'd love to try your set up that you recommend - just don't know anyone that has the on the Impreza though?
Keep drinking the water, applying the suntan lotion & best of all keep out of that hot Mediteranean sun, cos it certainly goes to your head..
#27
Scooby Regular
Join Date: Oct 1998
Location: Scoobysport, Basildon, UK
Posts: 4,300
Likes: 0
Received 0 Likes
on
0 Posts
LOL at Claudius, we'll have to meet up at Monte in Jan and share a couple of beers I'll probably have little rental car with substantially smaller brakes though, so be warned
Ali
see http://www.scoobysport.co.uk/brakes.htm for prices
It says 378mm on the web site, but that extra 3mm each side was juuuuuuusssstt too much
Ali
see http://www.scoobysport.co.uk/brakes.htm for prices
It says 378mm on the web site, but that extra 3mm each side was juuuuuuusssstt too much
#30
Scooby Regular
Join Date: Oct 2001
Location: Europe
Posts: 3,414
Likes: 0
Received 0 Likes
on
0 Posts
A mate finished his session with a 6 week coma, a couple of years ago. I'm not scared of much, but I am scared of the Ring.
I have a few friends who drive on there regularly, and also a friend of mine from France (who is a rally champion) recommended it to me. That's why I'd like to go.
I have been warned about changing grip and blind corners; the bottom line has always been to take it easy the first few days. And I will follow that advice, planning on going there for a week to have time to get an idea of what it's like.
I'm not scared of anything but cancer and German women I'll take it easy and will gradually increase my speed. But then I'm also worried, once I know where I'm going, that there might be someone just having spinned in the middle of the track after a hill when I arrive at high speed... I guess the risk is there and that's where you get the thrill from.
Porsches totalled and two dead bikers a weekend, it surely isnt the safest place on Earth, but thzen again not the least fun either, I guess. I'll give it a shot anyway.
Why dont you come anyway and show the Porsches what big brakes look like and have a few beers, even if you drive slowly or not at all??
I'll definitely be at the Monte as well, it's right here where I live