DS2500 4 Prodrive 330mm Brakes
20 June 2003, 12:18 AM
#1
Scooby Newbie
Thread Starter
Join Date: Mar 2003
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
I have a MY00 with a Prodrive 330mm brake conversion fitted with DS2500 pads, which I soon have to replace due to wear and tear. Trouble is, I can't seem to find the part number for the pads. Help please?
About 5mm left of the pads now, how soon is a change recommended?
Cheers
About 5mm left of the pads now, how soon is a change recommended?
Cheers
20 June 2003, 12:57 PM
#2
Scooby Regular
don't have part no. for ds2500 to hand , but we have found that Pagid rs19 is a far better option for this application.......less disc wear and better friction!!
mail me if you require any further info.....
alyn - asperformance.com
mail me if you require any further info.....
alyn - asperformance.com
24 June 2003, 12:33 AM
#3
Scooby Regular
Join Date: Feb 2003
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
DS2500 part no. FRP1077H for Alcon / Prodrive upgrade.
As normally there is always some pad taper (even with differential piston bore size calipers), unless you inspect every pad edge thickness I would change pads at 3mm Friction Material thickness.
Cheers, Stuart
As normally there is always some pad taper (even with differential piston bore size calipers), unless you inspect every pad edge thickness I would change pads at 3mm Friction Material thickness.
Cheers, Stuart
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM