Harvez

Im in the market and about to buy some STi Brembo's for my 95 WRX

Apart from the wheel cleerence which i have lots off, will i have any other problems fitting the front calipers or will it be just a straight swap ?

Thanks in advance for any help, i did search first but found nothing

P.s. Will Brembo's off any STi fit my WRX or does it have to be from a 8 ?

novarally

When I put the brembos on my 1994 wrx you will also need the discs and the ones I had came off a 2005 STI so the pcd were 114 instead of 100 so I had to have the discs redrilled. Another thing I found was that the bolts holding the brembos on are a different thread than the ones that you probably have on at the moment, so if you can, get the bolts with them as well or you might find you will have everything apart and your bolts wont fit. Hope this is of any help to you

Harvez

Thats great cheers mate

Where did you get the discs re-drilled?

Chelspeed

It'll only need redrilling if it's 2005 or newer, if i's 2004 or older then the pcd is the same as the WRX so no redrilling needed.