Brembo brakes STI 7 for old shape car
22 March 2002, 11:27 PM
#2
Scooby Regular
Join Date: Feb 2001
Posts: 475
Likes: 0
Received 0 Likes
on
0 Posts
They will fit, but you need at least 17" wheels and to either use spacers or get a wheel that has enough clearance for the caliper as it is very wide. Most 17" wheels won't have enough clearance for the caliper, so I'd check first.
MS
MS
23 March 2002, 01:26 AM
#3
Scooby Regular
Join Date: Apr 2000
Posts: 945
Likes: 0
Received 0 Likes
on
0 Posts
Kurt, I would go further than that and say that you will need a set of STI7 wheels, in order to clear the caliper, however the standard tyres will be too wide and foul on the wheel-arches
23 March 2002, 10:03 AM
#4
Scooby Regular
Join Date: Mar 1999
Location: The Great White North
Posts: 25,080
Likes: 0
Received 0 Likes
on
0 Posts
You will need at least STi7 wheels, with correct tyre for an older car, same kinda thing as with normal MY01 wheels on older cars.
The brembo's are very big! If you don't like the STi 7 wheels then Prodrivr has released another wheel which will go over the brembos.
Or spacers could be used, which is what I've had to do with my somewhat large movit calipers
The brembo's are very big! If you don't like the STi 7 wheels then Prodrivr has released another wheel which will go over the brembos.
Or spacers could be used, which is what I've had to do with my somewhat large movit calipers
Thread
Thread Starter
Forum
Replies
Last Post
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM