Why dont they fit??
#1
Why dont they fit??
Ive just done a swap of 17" standard STI 04 blobeye alloys for a set of 18" a-tech alloys, with a chap on scoobynet. He advised me that they fitted over his brembo`s on his newage spec-c and wanted my alloys to do the same. My 17`s fit fine, so we did the swap but his 18`s dont fit over the calipers. Are there different types of brembo 4 pots or are the bells on the discs different depths on spec-c. Ive put on some 3mm spacers and they still rub on the calipers. Now ive got to think of something else and im not sure what..... any advise please, cheers.
#3
i once bought a set years back for on of my cars and they came off the exact car as mine but when we tried to fit them to mine they didnt i think it was something to do with the pads on my car being new and his were very warn down.
#6
Scooby Senior
iTrader: (41)
Why dont they fit??
Cause he lied !
https://www.scoobynet.com/private-sa...ml#post9175547
Sorry Hammer mate, I think you got fooked !
but he says he removed them and there were no spacers
Sorry Hammer mate, I think you got fooked !
Trending Topics
#13
Scooby Senior
iTrader: (41)
I looked into the sizing and yours are probably 18x7.5 ET48 where as you really need their 18x8 ET48. I thought 5mm would do it but I hadn't realised it would involve studs !!!
Longer term I'd sell the wheels as they are nice given the correct application.
Would be worth a Mod PM mate
Longer term I'd sell the wheels as they are nice given the correct application.
Would be worth a Mod PM mate
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
matt12
ScoobyNet General
64
16 September 2015 09:16 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM